Tank Fuel Filter - M27006 - SWM Superdual 650

SWM Superdual 650 Original Flange Neck filter

New drop-in design fuel filter for SWM Superdual 650 to mount below the original fuel filler flange. INNOVATIVE **HDM3D** MEDIA WITH WELDED FILTER EDGES FOR THE BEST DIRT/WATER SEPARATION WHILE REFUELING, HUGE XL+ SURFACE. NB: big quantities of water and/or chemical contaminations, both deriving from “waste/cheat” or petrol additives, may result in a slow water dropping through the media or even a full water passage due physic and/or chemical interaction. Regardless of the water issue the FILTER will maintain its primary function of blocking the dangerous contaminants. To mount it, you don't even need to remove the "shield" shaped flange, follow the pictures, insert the media helping the corners with the head of the cable tie (in the package), alligne the filter cross to the bike axis, push the cap to the bottom of the hole, done. The new filter combines the extra fast **HDM3D** filtering media with the installing-friendly drop-in adapter, filter has a huge filtering surface of almost 1200 square cm combining a very fast refueling with optimal EFI fuel pump and fuel filter protection and the latest and unique welded edges tehcnology. This will protect the fuel pump, the original strainer works between 60 and 100 microns, and prolong the fuel filter life. In both cases the filter is really small and can clog very fast, plus the fuel pump is exposed to all kind of particles and water contamination, the neck prefilter will prevent all this saving the EFI system and preserving it for many tens of thousand of KM.

You think that the petrol, even the one you're buying around the corner of your house, is clean? think twice :)

https://www.guglatech.com/en/articles/2014/12/01/is-fuel-clean-guesssssssss https://www.guglatech.com/en/articles/2014/12/01/motorbike-fuel-filtration-why-how-yes-you-should This filter will help you prevent to keep changing fuel pump filters to prevent rough running or pump/EFI problems, like the one in the pictures above. While prefiltering during refueling, you can easily clean fuel pump filters instead of continously changing them to keep the motor running smoothly. After mounting your bike will be protected from contaminated petrol, keeping the whole EFI system in top-condition. The media is washable, and thanks to its huge surface, will last for many thousand of km. You can extract it, empty it and wash it should the case arise.

More info about this amazing media:

HDM3D Matrix - The revolution in active filters

Mounting is extremely easy. Just follow the pictures and done!