KTM 990 ADVENTURE LC8 FUEL PUMP MODULE DAITARN 3 - MFPD99

THE KTM LC8 FUEL PUMP REVOLUTION FOR ALL 990 ADVENTURE ALL YEARS 2006-2013 AND EARLY SD 990 Mk1 pre 2007

FUEL PUMP MODULE KIT DAITARN 3

ATTENTION: This Kit is not compatible with the original KTM fuel filter.

IT NEEDS AN OUT-OF TANK IN LINE FUEL FILTER, ONLY FOR RACE AND COMPETITIONS.

Below  you will find  3 reasons, why KTM 990 ADVENTURE LC8 Kit  is the ULTIMATE FUEL SYSTEM SOLUTION:

 1-NEVER AGAIN ULTRA SMALL FUEL FILTERS  TO BE CHANGED EVERY 15.000 KM

2-NEVER AGAIN BRITTLE MATERIALS, WRONG MOUNTINGS AND INSTABLE FUEL PUMP ASSEMBLY DESIGN;

3-NEVER AGAIN UNDER POWERED OR "WRONG" FUEL PUMP DESIGNS/BRANDS/MODELS!  

FREEDOM AT LAST! POWER AND RELIABILITY AS IT SHOULD HAVE ALWAYS BEEN!

• Ultra compact and robust design;
• Accepts all kind of Bosch Type 38 mm single impeller fuel pumps AND Kehin OEM design;
• There are no structural plastic parts;
• Wrong mounting/leaking is impossible;
• No more unstable/delicate clips or brittle filter encasing;
• Two kits available 990 Adventure and SuperDuke until 2007 and all others LC8 990-1xxx;
• Super Aluminum Alloy with extra deep anodization;
• Inox parts for screws and spacers;
• Nylon inert ring spacer;
• Special extra long connectors;
• Can mount also the fuel level sensor (slight difference in reserve will be shown, to be checked by the customers depending on Bike models) from SD and SM/SMR/SMT.

This is the ULTIMATE KTM LC8 V-Twin fuel pump modification.

Never a system will be so strong, never a system will be compatible with so many fuel pump designs and brands/models, never again the far too numerous problems of the Kehin/KTM fuel pump design. This is the ultimate fuel system for the KTM produced from 2006 until 2020.

The kit includes the following parts:

ATTENTION: NO OTHER PARTS RATHER THAN THE ONE IN THE LIST ARE INCLUDED, NO FUEL PUMPS, NO ORIGINAL KTM/KEHIN FUEL PUMP ASSEMBLY, ONLY THE COMPONENT INCLUDED IN THE BELOW LIST.

1- #1 Fuel Modul Daitarn III;

2- #1 Special extra long cable with Bosch A1 connector;

3- #2 Allen head Stainless steel screws;

4- #2 Stainless steel spacers or anodised Aluminium alloy accordingly to parts availability;

5- #1 Nylon pump adapter;

6- #1 each Allen head Stainless steel for the Fuel Pressure Regulator, Ground cable and/or Fuel Lever Sensor bracket;

7- #1 M9 round die for Stainless steel application;

8- #1 Pa High Pressure fuel hose;

9- #1 Set of o-rings for the fuel pump overhaul and new parts mounting.  

Check all our studies, all our tests, our lab experiments, our long road test:

THIS IS WHAT HELPED US to design the ULTIMATE AND EXCLUSIVE FUEL PUMP MOD DESIGN:  

https://www.guglatech.com/en/ktm-fuel-pumps-are-twins-really-twins/  

https://www.guglatech.com/en/fuel-pump-fight-oem-vs-the-world/  

Products, which will help to improve your protection:

MRT097 - External filter

GODZILLA

M00016

M00016-X-ARM

  KTM 990 ADVENTURE LC8 | KTM 990 ADV Fuel Pump | On-line Shop | Fuel Pump Protection | Motorcycle Fuel Pumps | KTM 990 ADVENTURE LC8 Fuel Pump Module Daitarn 3