Tank Fuel Filter - M060_06-ARM - BMW

BMW R1200 - K1200 Fuel Filter

INNOVATIVE **HDM3D** MEDIA  FOR YOUR BMW R1200 - K1200, WITH WELDED  EDGES FOR THE BEST **DIRT/WATER SEPARATION WHILE REFUELING, HUGE XL+ SURFACE** NB: big quantities of water and/or chemical contaminations, both deriving from “waste/cheat” or petrol additives, may result in a slow water dropping through the media or even a full water passage due physic and/or chemical interaction. Regardless of the water issue the FILTER will maintain its primary function of blocking the dangerous contaminants.

This FILTER IS FOR ALL THE BMW BMW R1200 - K1200 WITH METAL WELL BELOW THE CAP:

 All other models with red funnel: the correct code is M09006-WFS for Air/Oil cooled engine, and Liquid Cooled Engine will have  the  code M07006-ARM:

Special fuel neck prefilter designed to be mounted inside the original fuel cap, open the lid, insert it in the refill hole and done! Easy to insert and extract, no further modifications or mountings. Simply open the fuel cap and insert it! N.B. Some models may have a plastic adapter, simply pull it out of the neck and insert the filter.

SUMMARY:

-HDM3D media -Surface: XXL+ 1200 square cm of filtering surface, -Simply mounting and fast refuelling, -Washable and long lasting. The original system has a strainer working between 40 and 60 microns, nylon mesh, which is totally inadequate to protect the fuel pump that sees its life shortening by the Km. This filtration level will both preserve the fuel pump and prolong fuel original filter life avoiding nasty surprises.

Why filtering?

Motorbike fuel filtration why how,  yes you should

Is fuel clean, guesssssssss...

More info about the BMW EFI and Injection here:

BMW electronic fuel injection over the last 20 years

BMW fuel filter cleaning for gs, gs a, r t 1200 from 2002 to 2012 models

What if BMW had made it right on the first attempt?

Motorbike Fuel Filtration: why, how, yes...you should

BMW and they lived happily ever after