KTM 1050-1090-1190-1290 – Fuel Pump Module Kit Daitarn 3
THE FIRST PRODUCTION LOTT HAS FINISHED. THIS IS A PRE-ORDER AND PARTS SHALL BE DISPATCHED STARTING FROM THE SECOND WEEK OF SEPTEMBER
THE KTM LC8 FUEL PUMP REVOLUTION FOR ALL 1050 1090 1190 1290 ADVENTURE/SD AND RC8
COMPATIBLE ALSO WITH ALL SD POST 2007, SM/SMR/SMT
FUEL PUMP MODULE KIT DAITARN 3
This kit is not compatible with the original KTM fuel filter.
IT NEEDS AN OUT-OF TANK IN LINE FUEL FILTER, ONLY FOR RACE AND COMPETITIONS.
The REASONS why it is the ULTIMATE FUEL SYSTEM SOLUTION!
1- NEVER AGAIN ULTRA SMALL AND TO BE CHANGED EVERY 15.000 KM FUEL FILTERS
2- NEVER AGAIN BRITTLE MATERIALS, WRONG MOUNTINGS AND INSTABLE FUEL PUMP ASSEMBLY DESIGN;
3- NEVER AGAIN UNDER POWERED OR “WRONG” FUEL PUMP DESIGNS/BRANDS/MODELS!
FREADOM AT LAST:
POWER AND RELIABILITY AS IT SHOULD HAVE ALWAYS BEEN.
KTM fuel pump module features:
- Ultra compact and robust design;
- Accepts all kind of Bosch Type 38 mm single impeller fuel pumps AND Kehin OEM design;
- No structural plastic parts;
- Wrong mounting/leaking is not possible
- Not anymore unstable/delicate clips or brittle filter encasing;
- Two kits available 990 Adventure and SuperDuke until 2007 and all others LC8 990-1xxx;
- Super Aluminum Alloy with extra deep anodization;
- Inox parts for screws and spacers;
- Nylon inert ring spacer;
- Special extra long connectors;
- It can mount also the fuel level sensor (slight difference in reserve will be shown, to be checked by the customers depending on Bike models) from SD and SM/SMR/SMT.
This is the ULTIMATE KTM LC8 V-Twin fuel pump modification.
Never a system will be so strong, never a system will be compatible with so many fuel pump designs and brands/models. And never again the far too numerous problems of the Kehin/KTM fuel pump design.
This is the ultimate fuel system for the KTM produced from 2006 until 2020.
It includes the following parts:
THE KIT DOES NOT INCLUDE KTM ORIGINAL PARTS, PUMP, OR FUEL PUMPS OF ANY BRANDS, ONLY THE PART LISTED BELOW.
1- #1 Fuel Module Daytan III;
2- #1 Special extra long cable with Bosch A1 connector;
3- #2 Allen head Stainless steel screws;
3- #2 Stainless Steel special adapters;
4- #2 Stainless steel spacers ar bronze or alluminium alloy depending on the production lott;
5- #1 Nylon pump adapter;
6- #1 each Allen head Stainless steel for the Fuel Pressure Regulator, Ground cable and/or Fuel Lever Sensor bracket;
7- #1 M9 round die for Stainless steel application;
8- #1 Pa High Pressure fuel hose;
9- #1 Set of o-rings for the fuel pump overhaul and new parts mounting.
Check also our video here:
Check all our studies, all our tests, our lab experiments, our long road test:
This is, what has helped us to design the Ultimate and Exclusive KTM fuel pump module:
Related products, which will help to improve your protection:
KTM 1050-1090-1190-1290| KTM LC8 | KTM RC8 | KTM ADV Fuel Pump | On-line Shop | Fuel Pump Protection | Motorcycle Fuel Pumps | KTM Fuel Pump Module Daitarn 3 | Fuel Pump Module