THE KTM LC8 FUEL PUMP REVOLUTION FOR ALL 990 ADVENTURE ALL YEARS 2006-2013 AND EARLY SD 990 Mk1 pre 2007
FUEL PUMP MODULE KIT DAITARN 3
This Kit is not compatible with the original KTM fuel filter.
IT NEEDS AN OUT-OF TANK IN LINE FUEL FILTER, ONLY FOR RACE AND COMPETITIONS.
Below you will find 3 reasons, why KTM 990 ADVENTURE LC8 Kit is the ULTIMATE FUEL SYSTEM SOLUTION:
1-NEVER AGAIN ULTRA SMALL FUEL FILTERS TO BE CHANGED EVERY 15.000 KM
2-NEVER AGAIN BRITTLE MATERIALS, WRONG MOUNTINGS AND INSTABLE FUEL PUMP ASSEMBLY DESIGN;
3-NEVER AGAIN UNDER POWERED OR “WRONG” FUEL PUMP DESIGNS/BRANDS/MODELS!
FREEDOM AT LAST! POWER AND RELIABILITY AS IT SHOULD HAVE ALWAYS BEEN!
- Ultra compact and robust design;
- Accepts all kind of Bosch Type 38 mm single impeller fuel pumps AND Kehin OEM design;
- There are no structural plastic parts;
- Wrong mounting/leaking is impossible;
- No more unstable/delicate clips or brittle filter encasing;
- Two kits available 990 Adventure and SuperDuke until 2007 and all others LC8 990-1xxx;
- Super Aluminum Alloy with extra deep anodization;
- Inox parts for screws and spacers;
- Nylon inert ring spacer;
- Special extra long connectors;
- Can mount also the fuel level sensor (slight difference in reserve will be shown, to be checked by the customers depending on Bike models) from SD and SM/SMR/SMT.
This is the ULTIMATE KTM LC8 V-Twin fuel pump modification.
Never a system will be so strong, never a system will be compatible with so many fuel pump designs and brands/models, never again the far too numerous problems of the Kehin/KTM fuel pump design.
This is the ultimate fuel system for the KTM produced from 2006 until 2020.
The kit includes the following parts:
ATTENTION: NO OTHER PARTS RATHER THAN THE ONE IN THE LIST ARE INCLUDED, NO FUEL PUMPS, NO ORIGINAL KTM/KEHIN FUEL PUMP ASSEMBLY, ONLY THE COMPONENT INCLUDED IN THE BELOW LIST.
1- #1 Fuel Modul Daitarn III;
2- #1 Special extra long cable with Bosch A1 connector;
3- #2 Allen head Stainless steel screws;
4- #2 Stainless steel spacers or anodised Aluminium alloy accordingly to parts availability;
5- #1 Nylon pump adapter;
6- #1 each Allen head Stainless steel for the Fuel Pressure Regulator, Ground cable and/or Fuel Lever Sensor bracket;
7- #1 M9 round die for Stainless steel application;
8- #1 Pa High Pressure fuel hose;
9- #1 Set of o-rings for the fuel pump overhaul and new parts mounting.
Check all our studies, all our tests, our lab experiments, our long road test:
THIS IS WHAT HELPED US to design the ULTIMATE AND EXCLUSIVE FUEL PUMP MOD DESIGN:
Check also our video here:
Products, which will help to improve your protection:
KTM 990 ADVENTURE LC8 | KTM 990 ADV Fuel Pump | On-line Shop | Fuel Pump Protection | Motorcycle Fuel Pumps | KTM 990 ADVENTURE LC8 Fuel Pump Module Daitarn 3