KTM 690 – Husqvarna 701 Post 2019
NEW ENDURO/R SM drop-in design fuel filter. HDM3D Media to mount below the original fuel filler flange.
INNOVATIVE HDM3D MEDIA WITH WELDED FILTER EDGES FOR THE BEST DIRT/WATER SEPARATION WHILE REFUELING.
WARNING: ONLY FOR KTM 690 – Husqvarna 701 Post 2019!
NB: big quantities of water and/or chemical contaminations, both deriving from “waste/cheat” or petrol additives, may result in a slow water dropping through the media or even a full water passage due physic and/or chemical interaction. Regardless of the water issue the FILTER will maintain its primary function of blocking the dangerous contaminants.
The new KTM 690 – Husqvarna 701 Post 2019 Fuel Filter combines the extra fast HDM3D filtering media with the installing-friendly below the original flange mounting, This Filter has a huge filtering surface of almost 1200 square cm with welded edges combining a very fast refueling with optimal EFI fuel pump and fuel filter protection.
It will help you prevent to keep changing fuel pump filters to prevent rough running or pump/EFI problems.
While pre-filtering during refueling, you can easily clean fuel pump filters instead of continuously changing them to keep the motor running smoothly.
After mounting your bike will be protected from contaminated petrol, keeping the whole EFI system in top-condition.
The media is washable, and thanks to its huge surface, will really last for many thousands of km.
How difficult is it to install it?
Best flow will be obtained with the following mounting: (for now only in Italian;)